Club126UK
Fiat 126 Chat => Reputable Companies => Topic started by: Gadge on October 02, 2014, 06:42:40 PM
-
It's not so much a company but a member and his name is piotross and if your in need of that vital part then I highly recommend dropping him a message. He has sorted me out a few times and every time I've asked for a part he's came through and supplied it at not a bad price either. He's based in Poland (the mother land of the "maluch") and I realise it takes a lot to send money over to someone in a different country that you haven't met but I 100% trust this guy and his advice.
Thanks for the cylinder head piotross :D
-
You managed to get a big valve head then? :). I'm totally skint at the minute so glad you got it sorted :D. Let me know how the copper gasket goes! Keeping mine for the inevitable but for now its running :D. Glad I found Piotr over on the polish forum and he's making use of his membership here :D.
-
Yes recieved the head today and the gasket last week. its always good to have a "man on the inside" lol
-
Hi All
I would like to second Gadge ,What an outstanding service we received from Piotr with parts and help
for our 126 lately, Piotross sourced and arranged delivery a Bis windscreen front panel at a excellent price for such a rare panel :)
Spot on Piotr Thank you for you Help :D :D
Cheers
Pete & Julia
-
I too have had an excellent service from Piotr! I have so far bought the Front disk conversion kit and a copper head gasket from him and both parts were of superb quality and value. Both also arrived with me in less than 2 weeks! (Highlands, Scotland). Very trustworthy and can say for sure I'll be buying from him again soon! :)
-
I ordered a Timing Chain kit for my 126 From Piotross, it came exactly as described, perfect!
Thanks!
-
Thanks my friends for all good words ! :)
-
Hi
More parts arrived today :) again a super service :) :)
Thank you piotr
-
Hi
Again more outstanding service from Poland :D :D :D :D A nice new copper head gasket
arrived now fitted :) :)
Thank you Piotr
Cheers
-
I have received a nice little parcel from Piotr earlier this week. He has also helped me out in the past with some parts for our 124, so a big THANKS to him.
I`ll be doing more business with him in the future for sure.
Few pictures attached for you guys of Piotr`s work. Modified cylinder head with bigger valves :thumbup
(http://i885.photobucket.com/albums/ac53/Fiat-mad-lad/X_zpsed2db596.jpg) (http://s885.photobucket.com/user/Fiat-mad-lad/media/X_zpsed2db596.jpg.html)
(http://i885.photobucket.com/albums/ac53/Fiat-mad-lad/Y_zps8017a07b.jpg) (http://s885.photobucket.com/user/Fiat-mad-lad/media/Y_zps8017a07b.jpg.html)
(http://i885.photobucket.com/albums/ac53/Fiat-mad-lad/2_zps24d147cb.jpg) (http://s885.photobucket.com/user/Fiat-mad-lad/media/2_zps24d147cb.jpg.html)
(http://i885.photobucket.com/albums/ac53/Fiat-mad-lad/4_zps98acf871.jpg) (http://s885.photobucket.com/user/Fiat-mad-lad/media/4_zps98acf871.jpg.html)
-
The Head with bigger valves and modified intake and exhaust channels has potencial :) Put into this engine good camshaft and you will feel power of 126 ;)
-
Hi Piotross! I own the original factory moulds for the Barchetta 595 (126 based kit car).
I am interested in importing good examples of fiat 126s back to the UK. Air cooled versions have priority.
I would be interested in bringing back several at once but I do not have a connection in Poland. I hear you are the man to talk to.... I understand a vehicle in Poland always has to have an owner and must be registered to a Polish address. How does this work with exporting vehicles? I would just like to buy them, put them on a double deck trailer and drive them back to the UK. I have access to a tractor unit and car transporter that has been modified and is capable of carrying at least 16 cars side by side, bumper to bumper 8 on each deck. in two by two rows. I would only be interested in vehicles in good order and fully running. Older 70s models even better!
A friend tells me he has successfully converted 126s from left to right hand drive without too many issues and has the moulds for a GRP right hand drive dashboard.
If this is something you might be able to help with, my number is listed on the contacts page of my website. Kind regards, Marky. www.595s.org
-
Well here its another happy "customer" of piotross, parts arrived very quick and with no problems, i can give my word for him :)
Thanks for everything Piotr!!
-
I also recived my goods - all in perfect condition - the other day. Very VERY happy man :)
-
What parts does piotross have in? And what are prices like??
Sent from my iPhone using Tapatalk
-
Send him a message and ask?
-
Piotross prices are very reasonable. The parts that I have requested he always seems to be able to deliver, even very rare/ obscure parts. Definetly one of the first places I go to when in need
-
Ok then perfect, I'll give him a message now :)
Sent from my iPhone using Tapatalk
-
Thanks piotross :D
(http://i122.photobucket.com/albums/o272/gadge1/Mobile%20Uploads/2015-05/5C3EAB4D-B3CE-4B51-ACBA-EC767ADE3D91_zpsyqewaqux.jpg) (http://s122.photobucket.com/user/gadge1/media/Mobile%20Uploads/2015-05/5C3EAB4D-B3CE-4B51-ACBA-EC767ADE3D91_zpsyqewaqux.jpg.html)
-
Hey Folks, has anyone contacted Piotross recently ?? i have been trying with no luck!
-
Recently ordered and received a solenoid From Piotross, great person to deal with.
-
Just bought a voltage regulator from poitr and very pleased to say it was easy transaction and arrived quickly.
Bravo 8)
-
A big thank you to piotross for my tripod uj's looking forward to fitting them! slick transaction and arrived very quickly- top man!
-
Another big thnk you to piotross for my engine block, big valve head and oil pan today super happy!