Author Topic: Alloys for Enzo (Read 4274 times)

Little Enzo · « **on:** November 02, 2005, 03:05:36 PM »

hi again everyone, the best looking Fiat 126 in britain is going to get some new wheels.
can anyone suggest any that would fit with him, budget for as low as possible max 200Ã‚Â£.

Thanks

Rich and Enzo

Chris Lakin · « **Reply #1 on:** November 02, 2005, 06:02:32 PM »

hi Rich, cinquecento alloys then are the cheapest get a set for Ã‚Â£50 of ebay!!! but for around Ã‚Â£100 you get can x1/9 cromodora alloys which are made out of a very light magnesium alloy!!

Richard, i think an abarth moustache badge would look even better on your 126 than the ferrari ones.

regards

Chris

Little Enzo · « **Reply #2 on:** November 03, 2005, 11:22:17 AM »

thanks man il have a look at all of the above

Chris Lakin · « **Reply #3 on:** November 03, 2005, 12:37:28 PM »

there are some cinq wheels on ebay at present, take a look

thing is they are in Nottingham and buyer has to collect!!

http://cgi.ebay.co.uk/fiat-cinquecento-alloy-wheels-punto-uno-panda-126_W0QQitemZ4587060086QQcategoryZ10382QQrdZ1QQcmdZViewItem

Chris

toz · « **Reply #4 on:** November 06, 2005, 03:27:08 PM »

hi enzo,i have just started to fit alloy wheels to my convertible.they are off a volkswagen polo,i know that they are 2mm to big but you can fit wobbly nuts to compensate this :idea: .there are alot more wheels that will fit other than cinquecento wheels.i hope this helps.also you can go alot bigger and fatter than 13s.(trust me) :twisted:

Little Enzo · « **Reply #5 on:** November 10, 2005, 06:16:09 PM »

hi guys,
thanks for your advice, unfortunately i can only collect from norwich or london areas.
on the good side, enzo is running superbly at the moment after some early problems, the dent is out and after the wheels are done hel be stunning.

have any of you got pictures of your alloys uve put on to 126's.
im not a great mechanic, so simple is best!

thanks guys

Rich & Enzo

toz · « **Reply #6 on:** November 13, 2005, 01:38:28 PM »

hi enzo,i have not got any photos of my wheels on the car at the moment.as the wheels are being refurbed,and the car is being painted.my wheels are quite alot wider than the standard wheels they must come out the arches by almost 3 inches. iam sure this will be illegal as the wheels are surpposed be no wider than the arches.but you can always get some arch kits :wink: other wise you will have to make do with 13s or small 14s

Milky · « **Reply #7 on:** November 13, 2005, 08:11:25 PM »

I have a set of Cinq wheels on mine at present.

http://126bis.mysite.wanadoo-members.co.uk/

Look in the New Works bit

toz · « **Reply #8 on:** November 13, 2005, 10:17:16 PM »

hi,didnt you have some wheels from an x19,or did you just decide the sporting wheels were better?

Milky · « **Reply #9 on:** November 13, 2005, 10:20:53 PM »

Yes, got the Cromos in the loft for a later date. They need a full refurbishment

toz · « **Reply #10 on:** November 14, 2005, 07:51:07 PM »

hi milky,i know of somewhere that you can get the wheels done.i have just done mine today but am unable to do barrow jobs.it is 14 miles from louth..

Chris Lakin · « **Reply #11 on:** November 14, 2005, 08:53:54 PM »

toz do you like these alloys?

these are a variation of cromos.

regards

Chris

toz · « **Reply #12 on:** November 14, 2005, 09:00:34 PM »

hi chris,those wheels are diffrent,but cool :cool: ,they dont look like alloys,just bigger steel wheels.but these would be look alot better than standard wheels.

Chris Lakin · « **Reply #13 on:** November 14, 2005, 09:34:08 PM »

yer they are the cromodoras, (magnesium alloy) your right they do look like a nicer version of steel wheels lol but they are much much lighter so, really a performance mod too in that respect and bolt straight on!!

regards

Chris

Little Enzo · « **Reply #14 on:** November 16, 2005, 12:43:32 PM »

those are quite nice, any idea how i could get a similar set/cost? i keep looking on ebay but theres nothing.