Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: cider on May 15, 2018, 02:53:22 PM
-
Think I've found my starting issues
What's best engine in or out for gasket replacement (https://uploads.tapatalk-cdn.com/20180515/b4a1d030c2cab21580e7bf11318b9f97.jpg)(https://uploads.tapatalk-cdn.com/20180515/63dbab1906e17796d76bbef48bbfe2b8.jpg)
Sent from my SM-J530F using Tapatalk
-
You can replace the bis gasket with the engine in situ the hardest part is removing the carb you need a short 10m spanner as is supplied in the standard tool kit, when mine went I used a tin of K-Seal gasket sealer which is still working in the system 🙂
-
Hi
Just replaced the carb for the 3rd time this weekend thinking the car had over fuelling problems.
So had a thought it maybe head gasket and managed to find a cheap endoscope camera on eBay, Just need to find the motivation
Sent from my SM-J530F using Tapatalk
-
Although I didn’t like using gasket seal I always had it in my boot knowing that this was a common fault, it started spewing water out 100 miles away from home but seems to have done the trick while i get the motivation to do the job properly 😀 it’s about £8 on eBay and I recommend it to anyone that has a Bis to carry a bottle just in case👍