Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: Paullou126 on January 10, 2019, 10:00:46 AM
-
Hi some more help please I want to adjust my gear linkage just fitted a new gear coupling but think I need the gear linkage adjusting I believe there is two bolts that I need to slacken for this could any one tell me the location of the bolts ie left or right or both it’s a rhd 126 bis
Also the procedure thanks again
-
Taken from the Fiat 500 Club's archive, the principle is the same for the 126.
https://tinyurl.com/y8zxaqw3
-
Hi, if the problem is that some gear are hard to shift or they slide while driving, you need to adjust the gear lever. For that, there are 2 bolts on the right side of the gear shift tunnel, on the base.
If you find issues on the 1 or 3 gear, you need to loose these bolts and push the gear lever to the front
If you find issues on the 2 or 4 gear, you need to push it back.
Hope it helps! I had to do it myself after replacing the linkage and the clutch!
-
Hi all sorted now adjusted and now like new thanks
-
Hi all sorted now adjusted and now like new thanks
how did you do it eventually?