Author Topic: Dwell Angle Meter  (Read 1266 times)

0 Members and 1 Guest are viewing this topic.


  • Member
  • *
  • Posts: 72
  • Karma: 0
Dwell Angle Meter
« on: August 10, 2010, 07:13:16 PM »
Does anyone know of a good dwell meter with tach o (revs at idle) for sale. Do people on here tend to check their distributer dwell angle or just rely on points gap with feeler gauge?


  • Super Member
  • ***
  • Posts: 432
  • Karma: 4
Re: Dwell Angle Meter
« Reply #1 on: August 30, 2010, 08:55:23 AM »
Hi Worm,

 The correct way to set up points would be to use a dwell meter, but I personally have never owned one. Providing you rotor shaft bearings are in good condition and the rotor is not blowing in the wind then set the points 19-21 thou should be as good as you will get, after all the points only open 2 times per cam rev. Dwell becomes more important on 6 cyclinder car etc. [-/

air cooled, gt15 garret turbo with intercooler, 14x9" wheels with 225/40/14 toyos, front arb and disc brakes


SimplePortal 2.3.6 © 2008-2014, SimplePortal